| PART |
Description |
Maker |
| SPED220200 SPED210200 |
4.5mm-travel Push-push Type
|
ALPS ELECTRIC CO.,LTD.
|
| 0473140053 47314-0053 |
1.00mm (.039) Pitch ExpressCard Header, Top Mount, with Push-Push (Card Push) Mechanism, Lead free
|
Molex Electronics Ltd.
|
| 0473340001 |
1.10mm (.043") Pitch microSD Card Connector, Push-Push Type, without Detect Switch, Lead Free
|
Molex Electronics Ltd.
|
| 0473521001 |
1.10mm (.043) Pitch microSD Card Connector, Push-Push Type, with VSS (Supply Voltage Ground)
|
Molex Electronics Ltd.
|
| 5009990900 SD-500999-004 SD-500999-002 |
2.50mm (.098) Pitch SD Memory Card Connector, Shielded Type, Top Mount, Push- Push Ejector, Ultra Short Solder Tab
|
Molex Electronics Ltd.
|
| 1050341001 |
2.54mm (.100) Pitch SIM Card Connector, Push-Push Type, 6 Circuits, SMT, with Solder Tab, with Pegs
MOLEX Connector
|
Molex Electronics Ltd.
|
| 0679138003 67913-8003 |
2.50mm (.098) Pitch, SDIO Memory Card Connector, Reverse Mount, Push Push Type, with Card Lock Pin and Mylar, Lead free
MOLEX Connector
|
Molex Electronics Ltd.
|
| 693021010811 |
WR-CRD - MICRO SIM - PUSH & PUSH TYPE - 8 PINS
|
Wurth Elektronik GmbH &...
|
| 2PPM |
Push Push mechanism for converting spring return actuator into maintained 2PPM
|
Altech corporation
|
| 2900 29-08-0524-MG |
Card Connector microSD - Normal Polarization, Push-Push, Surfacemount
|
3M Electronics
|
| SM3511 |
PUSH PUSH EXTENDED FOR LED GREEN
4-Bit Single-Chip Microcomputer(For Data Bank Use)
|
Sharp Corporation
SHARP[Sharp Electrionic Components]
|
| FPS009-2901-0 |
SD Card & MMC Reader - Push / Push (Low Profile)
|
Yamaichi Electronics Co., Ltd.
|
